Home› General
ReportBuilder 22.06 now available including Delphi 12.2 support!
New Blog Posts: Merging Reports - Part 1 and Part 2

Print Avery label #939109

rbuserrbuser
edited April 2009 in General
Hi all,

(using Delphi 6, RB 7.03)

I have to setup label printing on dot matrix printer Lexmark - Forms
Printer 4227 Plus using Avery labels #939109.

Using the Wizard I selected Dot Matrix printer & Label Template #4146.
Things are starting to look OK position wise BUT cannot get it to
print in DRAFT mode. Is there a setting in RB to make this printer
print in Draft mode and stop the form feed at the end?

Thank you very much,
Pat

Comments

  • nicociziknicocizik
    edited April 2009
    Hi Pat,

    ReportBuilder does not natively give control over the print quality of a
    report. You will need to access the driver directly to do so.

    Controlling the print quality can be done using the Device Settings of the
    printer driver you are using (click the "Properties" button in the print
    dialog). This can also be accessed using the DeviceSettings property of the
    PrinterSetup in the designer.

    --
    Regards,

    Nico Cizik
    Digital Metaphors
    http://www.digital-metaphors.com

    Best Regards,

    Nico Cizik
    Digital Metaphors
    http://www.digital-metaphors.com
This discussion has been closed.