I get this error every time I try to install 7.04 build 2. I had installed the original 7.04, then tried to install the build 2. After I got the error I tried uninstalling 7.04 then installing build 2, but I still get the error. Help! Aaron
Please try the following steps to clean a corrupt installation before re-installing ReportBuilder 7.04.
-------------------------------------------- Article: Cleaning up a Corrupt Installation --------------------------------------------
If you have been advised by Digital Metaphors technical support that you may have a corrupt installation, or if you are having difficulty installing, compiling or running applications after a ReportBuilder install, then it may be necessary to manually remove all ReportBuilder files from your system. Corrupt installations usually result when you are installing over a previous version of ReportBuilder which was not installed into the default directory, which was recompiled from the source, or when ReportBuilder files were manually moved from the default install location. Cleaning up a corrupt installation, consists of locating all ReportBuilder related files, and deleting them from your system. The first step is to use the uninstall program to remove as much of ReportBuilder as possible.
Run the uninstall program
1. Exit Delphi, and all other applications. You should have no applications running except the uninstall, otherwise you may lose some of your work.
2. Select Start | Settings | Control Panel from your Windows desktop.
3. Double-click the Add/Remove programs icon.
4. Locate the version of ReportBuilder you wish uninstall and double-click it.
5. The first page of the Uninstall Wizard allows you to choose between an Automatic or Custom uninstall. Choose Custom and click the Next button.
6. Click the Select All button, then the Next button. Repeat these steps until you reach the last page of the wizard.
7. Click the Finish button. All of the items you selected will be removed from the system.
8. After all the ReportBuilder files are removed, you may be prompted to reboot the system. If this is the case, reboot the system.
Delete the ReportBuilder root directory (and all subdirectories)
1. Using the Windows Explorer, locate the ReportBuilder root directory. The default directory is:
C:\Program Files\Borland\DelphiX\RBuilder
2. Once you have located this directory, inspect it. If you have any custom work in this directory which you would like to keep, move it to another directory.
3. Delete the ReportBuilder root directory.
Delete all remaining ReportBuilder files
1. Using the Windows Explorer, search the entire hard drive for all occurrences of:
dclRB*.bpl dclRB*.dcp rb*.bpl rb*.dcp
2. Delete any occurrences which correspond to the version you are removing. All packages are named with the convention NN, where the first number is the ReportBuilder version and the second number is the Delphi version. Thus, a typical package name for Delphi 5 would be rbRCL45.bpl. The same package for Delphi 4 would be: rbRCL44.bpl. Check Installing ReportBuilder for a list of the packages associated with each version.
3. Using the Windows Explorer, search your hard drive for all occurrences of:
pp*.* da*.* ra*.*
4. These are the prefixes used by individual ReportBuilder units. 'pp' is used for ReportBuilder units, 'da' is used for DADE units, and 'ra' is used for RAP units. Depending on which ReportBuilder you have (Standard, Professional or Enterprise) you may not have all of these unit types.
Additional Notes:
1. Never have Delphi running when installing ReportBuilder.
2. All ReportBuilder related files should be stored in the root directory $(DELPHI)\RBuilder.
3. All ReportBuilder run-time packages should be stored in the Windows\System directory.
4. You should never have ReportBuilder files in Delphi\Lib, Delphi\Bin or Delphi\Projects\Bpl.
-- Thanks for supporting ReportBuilder! Please vote for ReportBuilder in the Delphi Informant Readers Choice awards!
Sorry, I thought 7.04 actually installed successfully. You are probably getting this error because you did not download the complete installation file. Please re-download the installation file and try to reinstall.
-- Thanks for supporting ReportBuilder! Please vote for ReportBuilder in the Delphi Informant Readers Choice awards!
I tried re-downloading, but I will try again. 7.04 (the first version) installed fine. build 2 hasn't installed at all yet, it keeps giving me that error.
Comments
Please try the following steps to clean a corrupt installation before
re-installing ReportBuilder 7.04.
--------------------------------------------
Article: Cleaning up a Corrupt Installation
--------------------------------------------
If you have been advised by Digital Metaphors technical support that you
may have a corrupt installation, or if you are having difficulty
installing, compiling or running applications after a ReportBuilder
install, then it may be necessary to manually remove all ReportBuilder
files from your system. Corrupt installations usually result when you
are installing over a previous version of ReportBuilder which was not
installed into the default directory, which was recompiled from the
source, or when ReportBuilder files were manually moved from the default
install location. Cleaning up a corrupt installation, consists of
locating all ReportBuilder related files, and deleting them from your
system. The first step is to use the uninstall program to remove as
much of ReportBuilder as possible.
Run the uninstall program
1. Exit Delphi, and all other applications. You should have no
applications running except the uninstall, otherwise you may lose some
of your work.
2. Select Start | Settings | Control Panel from your Windows desktop.
3. Double-click the Add/Remove programs icon.
4. Locate the version of ReportBuilder you wish uninstall and
double-click it.
5. The first page of the Uninstall Wizard allows you to choose between
an Automatic or Custom uninstall. Choose Custom and click the Next
button.
6. Click the Select All button, then the Next button. Repeat these
steps until you reach the last page of the wizard.
7. Click the Finish button. All of the items you selected will be
removed from the system.
8. After all the ReportBuilder files are removed, you may be prompted
to reboot the system. If this is the case, reboot the system.
Delete the ReportBuilder root directory (and all subdirectories)
1. Using the Windows Explorer, locate the ReportBuilder root directory.
The default directory is:
C:\Program Files\Borland\DelphiX\RBuilder
2. Once you have located this directory, inspect it. If you have any
custom work in this directory which you would like to keep, move it to
another directory.
3. Delete the ReportBuilder root directory.
Delete all remaining ReportBuilder files
1. Using the Windows Explorer, search the entire hard drive for all
occurrences of:
dclRB*.bpl
dclRB*.dcp
rb*.bpl
rb*.dcp
2. Delete any occurrences which correspond to the version you are
removing. All packages are named with the convention NN, where
the first number is the ReportBuilder version and the second number is
the Delphi version. Thus, a typical package name for Delphi 5 would be
rbRCL45.bpl. The same package for Delphi 4 would be: rbRCL44.bpl.
Check Installing ReportBuilder for a list of the packages associated
with each version.
3. Using the Windows Explorer, search your hard drive for all
occurrences of:
pp*.*
da*.*
ra*.*
4. These are the prefixes used by individual ReportBuilder units. 'pp'
is used for ReportBuilder units, 'da' is used for DADE units, and 'ra'
is used for RAP units. Depending on which ReportBuilder you have
(Standard, Professional or Enterprise) you may not have all of these
unit types.
Additional Notes:
1. Never have Delphi running when installing ReportBuilder.
2. All ReportBuilder related files should be stored in the root
directory $(DELPHI)\RBuilder.
3. All ReportBuilder run-time packages should be stored in the
Windows\System directory.
4. You should never have ReportBuilder files in Delphi\Lib, Delphi\Bin
or Delphi\Projects\Bpl.
--
Thanks for supporting ReportBuilder! Please vote for ReportBuilder in the
Delphi Informant Readers Choice awards!
http://www.delphizine.com/ballot2004/
Nico Cizik
Digital Metaphors
http://www.digital-metaphors.com
have the original 7.04 anymore so I can't see if that works...
Sorry, I thought 7.04 actually installed successfully. You are probably
getting this error because you did not download the complete installation
file. Please re-download the installation file and try to reinstall.
--
Thanks for supporting ReportBuilder! Please vote for ReportBuilder in the
Delphi Informant Readers Choice awards!
http://www.delphizine.com/ballot2004/
Nico Cizik
Digital Metaphors
http://www.digital-metaphors.com
installed fine. build 2 hasn't installed at all yet, it keeps giving me that
error.
machine as well.
--
Thanks for supporting ReportBuilder! Please vote for ReportBuilder in the
Delphi Informant Readers Choice awards!
http://www.delphizine.com/ballot2004/
Nico Cizik
Digital Metaphors
http://www.digital-metaphors.com
worked! Sorry for all the trouble...
--
Thanks for supporting ReportBuilder! Please vote for ReportBuilder in the
Delphi Informant Readers Choice awards!
http://www.delphizine.com/ballot2004/
Nico Cizik
Digital Metaphors
http://www.digital-metaphors.com