rbuser

Comments

• Nico Cizik (Digital Metaphors) schrieb:
  
  Hallo Nico,
  
  thanks a lat for Your prompt answer!
  
  Unfortunately, is the link dead (server time out).
  Could You please post the article part in question here.
  
  

  in Different bis for each page with page chaching on and double pass report Comment by rbuser February 2010
• That actually worked (save to file and reload), however I found that
  stringreplace do the work a bit more smooth... and after a few tries, it
  seems to be working!
  
  
  tks!
  
  
  
  
  

  in Upgrading from BDE to NativeDB (and from RepBuilder 6 to 10) in one shot! :) Comment by rbuser February 2010
• "Luis" wrote in message news:4b7c5e90$1@mail....
  
  I've just done a similar thing for a BDE/Paradox set of reports changing
  them to use UniDAC data access components.
  
  The only way I found was to programatically load the re…

  in Upgrading from BDE to NativeDB (and from RepBuilder 6 to 10) in one shot! :) Comment by rbuser February 2010
• Nard, we have RB12 but I have this issue too.
  
  if regional settings are differrent from pc to pc; reports with a 'between'
  clause show the error. If the user enter an integer followed by a ',' with
  no decimals the report works…

  in European decimal separator (",") and AutoSearch parameters Comment by rbuser June 2011
• Thank you Nard,
  the 'decimal separator' issue has been solved!
  
  Regards
  Ettore
  
  P.S. I forgot that I need to rebuild also the packages...
  Actually our application uses runtime packages, so I rebuilt
  rb…

  in European decimal separator (",") and AutoSearch parameters Comment by rbuser February 2010
• Thank you Nard,
  the patch has solved the problem of the floating point parameter with a
  single value.
  
  But (there is always a 'but') the error still occurs in two situations:
  - at design time (and this is not an iss…

  in European decimal separator (",") and AutoSearch parameters Comment by rbuser February 2010
• Ah, I see.
  Missunderstood you a bit
  
  That would be an option, sure, though the fax number would still be visible…

  in What is the best way to send a fax automatically? Comment by rbuser March 2010
• Hi Nard,
  thanks for your reply.
  
  I'm using the watermark functionality for original purpose and it's a very
  nice feature. I thought of it as an possibility, but I think it wouldn't
  work either, since the watermark is visib…

  in What is the best way to send a fax automatically? Comment by rbuser February 2010
• i have try to add un DBCALC component with DATAPIPELINE = DATASET_B and
  FIELD = 'VALUEFIELD'
  in main report.
  
  
  but dont' work , DBCALC work always in DATASET1
  DATASET_B is ignored ( Bug ? )
  
  
  
  i ha…

  in Move 2' dataset - from internal report Comment by rbuser March 2010
• Nico,
  
  My problem is, he isn't fireing an BeforePrint Event.
  I put a breakpoint in my BeforePrint EventBut it is'nt Fired.
  
  I use the Report.Print to print the report
  
  any sugestions ?
  
  kr
  
  
  

  in Printing Specified pages Comment by rbuser March 2010
• I couldn't find HtmlHelp in a version 11.08, only WinHelp and Help2. Where
  can I get HtmlHelp for ver. 11.08 ?
  
  

  in Is it possible to connect to TppDesigner a help file in format Microsoft Document Explorer (RBuilder Comment by rbuser March 2010
• That's just what I was looking for.
  
  Thanks!
  Mark
  
  

  in CrossTab on Advanced Component tool bar? Comment by rbuser March 2010
• Hi Nico,
  
  Thanks for the quick response.
  
  Yes, I am sure we have RB Enterprise installed.
  
  I think I figured out what is going on. I wrote this end-user report
  builder app years ago (probably before CrossTabs was …

  in CrossTab on Advanced Component tool bar? Comment by rbuser March 2010
• Nico,
  
  They were defined as memos. Have changed them to be blobs and do not get an
  error and can manually assign them. When dragged into the designer they are
  assumed to be images. Is there anyway I can change this behaviour?

  in Defining DataType as Rich Text Comment by rbuser March 2010
• Nico,
  
  Thanks for your reply.
  
  How can a rich text field be used then. If a user adds a TppDBRichText
  component and manually fills in the field on generation there's an error.
  Any help would be greatly appreciated.

  in Defining DataType as Rich Text Comment by rbuser March 2010
• ok good
  
  
  but i have another problem
  
  i call my report ( generic function ) with this code :
  

  in How i can to have Watermark not visible in EndUser RAP ? Comment by rbuser March 2010
• I don't know how I can make the report much more simple. It was made with
  the Report Builder template for Avery 5160 labels. There are simple 5 DBText
  fields. How do you suggest I simplify it?
  
  Remember that one day it worked, …

  in Bordbk105N - Assertion failure. Comment by rbuser March 2010
• I have no clue as to how to disable DEP. However, it doesn't make sense to
  me that DEP would cause this with only one TppReport when there are at least
  12 others that have no problem. Please explain. Also, do you think I should
  jus…

  in Bordbk105N - Assertion failure. Comment by rbuser March 2010
• Thanks Nico
  
  

  in Supressing blank fields Comment by rbuser April 2010
• to Firebird 1.5.2
  
  Hi,
  Massimiliano Trezzi
  
  
  

  in String autosearchfields and apostrophe Comment by rbuser May 2010
• > Delphi 2010 RAD Studio
  
  you may need to recompile the source for ppChrtUI.
  
  If that doesn't work, what version of TChart are you using?
  
  Ed Dressel
  Team DM
  

  in Chart UI Comment by rbuser June 2010
• thanks Nard
  
  "Alejandro Romero Parra" escribi? en el mensaje
  

  in SQL result from Reporting solution not: FULL LEFT or RIGHT OUTER join tables, but QueryDesigner FORM Comment by rbuser July 2010
• By the way I'm using Delphi 7 and RB 10
  
  "Alejandro Romero Parra" escribi? en el mensaje
  

  in SQL result from Reporting solution not: FULL LEFT or RIGHT OUTER join tables, but QueryDesigner FORM Comment by rbuser July 2010
• thank you very much
  
  

  in ppReportExplorer error Invalid Template Format with user ClientDataSet Comment by rbuser July 2010
• Hi,
  
  I downloaded the trial version of site is not coming with the demo projects?
  
  Ivan
  
  
  

  in ppReportExplorer error Invalid Template Format with user ClientDataSet Comment by rbuser July 2010
• Good solution. Thank you very much.
  
  And congratulations for the step ahead in report builder.
  
  Francisco Ruiz
  
  

  in Report builder diferences in the parameters concept makes multiquery reports unusable Comment by rbuser July 2010
• Nard,
  
  I do use the autojoin and it works fine when an end user creates just one
  set of data however, if they create two or more so that subreports can be
  used and the join fields are not included, the data diagram obviously ca…

  in Force Field Inclusion Comment by rbuser July 2010
• Thanks Nico!
  
  Thats very informative
  
  
  

  in Reportbuilder connection to DBase via ADO? Comment by rbuser August 2010
• Hi Nico,
  
  Thanks for the reply. I did manage to figure out my first problem being I
  did not include the ADO unit as you mention in Reportbuilder connection to DBase via ADO? Comment by rbuser August 2010
• Ok, I figured out the problem with ADO at least *embarrassed*
  
  I forgot to enable the ADO compiler directive in the d…

  in Reportbuilder connection to DBase via ADO? Comment by rbuser August 2010
More Comments